This section outlines the various types of issues we may flag and provides our quality expectations and standards.
48 articles
Out of tolerance"Out of tolerance" means that one or more dimensions inspected at the Geomiq Quality Hub do not meet the specified tolerances.
Formal inspection report missing
Inspection report Incomplete (Dimensions missing)
Quality of the Image/Photo is unacceptable for review
Incorrect dimension/tolerance recorded on inspection report
Manual Inspection Report Missing
Material Data Sheet Missing
Finish Incorrect
Scratches & Scuff MarksConcerning the issue of excessive scratching and scuff marks on machined components, outlining their causes, preventive measures.
Threads Incorrect/missingEnsure that the correct threads are tapped and checked before shipping the components to Geomiq.
DentsPrevent dents on your parts by enhancing your packaging and handling methods before shipping.
Standard Inspection report missing
Oil/dirt/marksEnsure parts are thoroughly cleaned and free of any foreign contaminants, including oil, dirt, cooling fluids, and other lubricants used.
GD&T Features not inspected
Machined to incorrect dimension/geometry
Vendor Failed to Upload photos
Part Marking IncorrectEnsuring that the engraving or part marking requirements are clearly understood prior to beginning to avoid errors.
Wrong Material
Chatter/poor machining
Missing Features
Streaks if Anodised
Certificates of Conformity (ROHS, ISO etc) Missing
Spelling errors in Inspection report
Scotch pad finished
Wrong tolerance indicated on the inspection report
Discolouring
Warped
Bead blasting missing
Polishing missed
Surface roughness not met
Burrs on edges/threads
CMM inspection Report Missing
Incorrect Revision Made
Formal Inspection report - Sample parts inspected not labeled
Inserts not installed (PEM / HELICOIL)
Corroded/Oxidised Parts
3D Printing - Stepping/Issues resulting from orientation of print
Goods Damaged in Transit from Vendor
Incorrect Anodising colourEnsuring parts are manufactured to specification with the correct secondary Finish colour.
Inspection report not uploaded in digital format
QTY Delivered Incorrect
Supplier missed Hardening process
Colour IncorrectEnsuring parts are manufactured to specification with the correct colour.
Heat treatment HRC value not provided on inspection report
Part marking missing
Masking instruction not followed
Swarf left in holes
Vendor Part Labels on packaging