Summary
The threads requested were either not manufactured or were incorrectly made, resulting in parts that do not meet customer requirements or cannot be assembled with mating components. Ensure to follow the PDF engineering drawing attached with each order that specifies hole and thread requirements.
Root Causes
Drawing information was not correctly followed or interpreted.
Incorrect threading information was used.
Threading requirements were missed during manufacturing.
Threads were not measured or tested with a gauge.
Additional threading information was not requested.
Solutions
Double-check threading requirements during manufacturing.
Ensure all threads are checked and tested during inspection.
Use the appropriate gauge to test threads to the correct tolerance.
Provide accurate measurements during inspection.
Ensure all threading information is thoroughly checked to avoid delays and costs. If you have concerns about the accuracy or completeness of the threading information, please contact us immediately.
Next Steps
Follow the instructions provided via the platform. Geomiq may attempt to fix threading issues caught in-house, but any additional costs for completing production will be deducted from the purchase order and will not be covered by Geomiq.